Air Quality Monitoring Products

Approx. 4.3 Lakh / Set Get Latest Price

It monitors parameters of treated water coming out STP or ETP plants and send data online on the server. LIKE BOD , COD , TSS , PH. Designed as per CPCB requirement for UV absorption technology, Our company is TUV -SUD certified , we have CE certificate also. 

Approx. 60,000 / Piece Get Latest Price

Product Brochure
Particulate air pollution is separated into three classifications; coarse, fine and ultrafine particles. Coarse particles have a diameter of between 10µm and 2.5µm and settle relatively quickly whereas fine (0.1 to 2.5µm in diameter) and ultrafine (<0.1µm in diameter) particles remain in suspension for longer.

Our Fine Particulate Sampler AI-102 is precisely designed ambient air sampler for fine dust sampling. The AI-102 is a passive instrument for sampling fine particles (PM2.5 fraction) and is based on impactor designs standardized by USEPA for ambient air quality monitoring. Ambient air enters the series samplers system through an Omni-directional inlet designed to provide a clean aerodynamic cut-point for particles greater than 10 microns. Particles in the air stream finer than 10 microns proceed to a second impactor that has an aerodynamic cut-point at 2.5 microns. The air sample and fine particulates exiting from the PM 2.5 impactor are passed through a 46.2 mm diameter PTFE filter membrane that retains the fine particulate matter. The sampling rate of the system is held constant at 1 m3/hr (16.67 LPM) by a suitable critical orifice. For airflow measurement and flow totalisation of air passed through total sampling duration a dry gas meter is provided in the instrument that gives actual flow rate up to 0.0001 m3/min flow resolution.

Features:

• PM10 and PM2.5 Impactors of sampler based on designs standardized by USEPA.
• Separation of the cabinet into two sections ensures that temperature of PM 2.5 filter remains close to ambient temperature.
• Brush-less pump with low noise.
• The same instrument can be used for PM10 and PM2.5 sampling separately.
• The lower sampling rate of 1m3/hr reduces filter choking even in areas having high FPM levels.
• Critical Orifice maintains constant sampling rate of 1m3/hour.
• Compact and portable for convenient field operation.
• Oil-free pump with low noise.

Technical specifications:

• Particle Size: Omni-directional air inlet with PM 10 separation through an impactor followed by PM 2.5 separation through a WINS Impactor.
• Unaffected by voltage fluctuation and filter choking maintained by critical orifice system.
• Sampler unaffected by +/- 10% fluctuation in supply.

Approx. 8,000 / Piece Get Latest Price

being one of the trusted organizations in the market, we are engaged in providing a wide range of Air Quality Monitor.

Features:

• Impeccable performance
• Rugged design
• Easy to use

Use:

• Used widely in indoor and industrial environments to measure common air pollutants

Approx. 25,000 / Piece Get Latest Price

Next Sense Technologies made Portable Particulate Monitor, PPM-01, uses laser light scattering principle based sensors to give accurate and reliable values of particulate matter. PPM-01 is a hand-held air quality monitor which can monitor particulate matter in indoor/ambient air. Particulate matter measurement is taken in three ranges, PM1, PM2.5 and PM10. The PDM-01 has a very easy user interface and comes with inbuilt data logger. Rechargeable batteries provide continuous operation till long hours.

Features:

• Good consistency and real time response.
• High sensitive and quick response.
• Low power consumption.
• Battery operated instrument.
• Compact and light weight body.
• Easy user interface.
• Internal memory for data logging.
• USB communication.
• Carrying case for easy handling.

Specifications:

• Measurement Range: (PM 1.0, PM 2.5, PM 10) 0 to 1000 ug/m3
• Data logging: USB port
• Logging Interval: User selectable
• Battery: Rechargeable battery with long run hours on full charge.
• Accessories: Carrying case, Charger
• Working humidity range: 0 TO 95% RH

Approx. 25,000 / Piece Get Latest Price

Under the meticulous supervision of our highly skilled professionals, we are providing high-quality range of Indoor Air Quality Monitor.

Features:

• PM 10, PM 2.5
• CO₂ in PPM
• VOC in PPB
• Tempreture and Humdity
• Data Logging with inbuilt 4 GB memory
• Data transmission to server with realtime graphical display
• HDMI Touch Display
• Imoprted sensors
• Calibrated Sensor.

Use:

• Used to measure the quality of Indoor air Quality.

Approx. 5,000 / Piece Get Latest Price

Product Brochure
Portable Indoor Air Quality Monitor (IAQ) refers to the air quality within and around buildings and structures, especially as it relates to the health and comfort of building occupants. Understanding and controlling common pollutants indoors can help reduce your risk of indoor health concerns. Health effects from indoor air pollutants may be experienced soon after exposure or, possibly, years later.

Gas and respirable particulates in the air are the primary sources that contribute to poor IAQ. Sources can include inadequate ventilation, poorly maintained HVAC systems, wood and coal stoves, non-vented gas heaters, environmental smoke, vehicle exhaust emissions, building materials, carpeting, furniture, maintenance products, solvents, cleaning supplies etc. The actual concentrations of these pollutants can also be amplified by other external factors including poor ventilation, humidity, and temperature.

Next Sense Technologies made Indoor Air Quality Monitor, PAM-01, is a hand-held air quality monitor with microcontroller based design. It can detect indoor PM2.5 mass concentration, CO2 concentration, TVOC, temperature and related humidity and output real-time measurement. It comes with data logging facility and battery backup.

Optionally the PAM-01 also comes with a built-in Wi-Fi module, for continuous and online monitoring of IAQ index anytime and anywhere by data transmission to any server or a central display.

The PAM-01 is widely used for the purpose of Indoor air monitoring, Ventilation systems, Air purification systems in offices, industries and household.

Features:

• Integrating laser particle sensor module (capable for real-time PM2.5 digital display), miniature and high-accuracy NDIR CO2 sensor module, semiconductor VOC sensor module (capable for digital display), RH&T sensor module.
• The PM sensor module integrated adopts advanced laser scattering technology to detect PM2.5 mass concentrations precisely.
• The VOC sensor module integrated is based on semiconductor principle, have the great selectivity of formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol etc.
• The NDIR CO2 sensor module is with high accuracy, great stability, automatic calibration program (no need of manual maintenance)
• Good consistency and real-time response.
• Accurate and reliable data.
• Low power consumption.
• Battery operated instrument.
• Lightweight body with an easy user interface.
• Internal memory for data logging.
• Easy data retrieval through a USB port.
• With Voltage regulator design and anti-static ABS lead-free injection molding shell which can effectively shield electromagnetic interference.
• Carrying case for easy handling.

Specifications:

• Data logging: USB port
• Data format: Microsoft Excel
• Logging Interval: User selectable from 1 minute to 24 hours
• Battery: Rechargeable battery with 6 – 8 hours of backup
• Accessories: Carrying case, Charger

Approx. 1.5 Lakh / Unit Get Latest Price

Product Brochure
An Metrological Ambient Air Quality Monitoring Station (EE-WMS-AQM) is built at the component level to provide an organization with the instruments it needs to meet its measurement objectives. The versatility of this automated weather station is evidenced in your ability to add, remove, or substitute sensors or other peripherals as your data measurement and monitoring needs change. To assess the numerous grade automated weather station models and ultimately determine which components are the most suitable, you should first identify your application’s needs and requirements. Your familiarity with these items will help ensure that the automated weather station components you select will meet your compliance requirements.

Features:

• Solar powered, fully automated system
• An expansion peripheral can enable multiple sensors to share the same data-logger connection
• You may already own sensors that you plan to use in your automated weather station
• 0-9 lpm higher efficient vacuum pump, which automatically functions on an hour interval
• Convenient filter tool provided for the separation of aerosol droplets & condensate from gases
• Unattended weather recording at remote and exposed sites
• In-built system software with data file management
• Large storage capacity, and they store data permanently
• Wide choice of sensors
• GPRS modem communications
• Secure & Encrypted

Specifications:

• Thimble: Glass Fiber Thimble/PTFE Filter for the separation of particulates
• Pump: 0-9 lpm (Liter Per Minute) higher efficient vacuum pump
• Solar panel: Polycrystalline Photovoltaic PV Solar Panel 35 watt for 12V battery charging
• Data-Logging: Internal-SD card & External-USB drive

Approx. 45,000 / Piece Get Latest Price

Product Brochure
High Volume Sampler are the basic instrument used to monitor ambient air quality. They have widespread use all over the world to measure air pollution in industrial areas, urban areas, on the shop floor, near monuments and other sensitive areas.

In our High Volume Sampler AI-105, air-borne particulates are measured by passing air at a high flow rate of a cubic meter per minute through a high-efficiency filter which retains the particles. The instrument measures the volume of air sampled, while the amount of particulate collected is determined by measuring the change in weight of the filter paper as a consequence of the sampling. The passage of air reaching the filter is designed to prevent heavier settable dust particles from reaching the filter.

Features:

• No need to keep track of carbon brushes thus eliminating unnecessary breakdown and minimize running cost.
• Low noise and less variation in flow.
• Silicone tubing in place of PVC tubing.
• Unique flow measuring system using an orifice plate incorporated in filter holder casting ensure an exact measurement of the air passing through the filter, with minimum possibility of leakages, or extraneous air, affecting the flow readings.
• Special hinge design allows easy separation of gable roof from the main housing making the system more rugged and compact for transportation.

Technical specifications:

• Particle Size: Particles 0 to 100 microns & below collected on Filter Paper holder. SPM bigger than 100 microns collected in a separate sampling bottle under the cyclone.
• Time Record: 0 to 9999.99 hours recorded on a Time Totalizer.
• Automatic Sampling: 24 hrs programmable timer to automatically shut off the system after a specific time interval.

Approx. 10,000 / Piece Get Latest Price

Product Brochure
Many industrial and construction sites have the potential to expose their staff to harmful dust or vapours and gases. Inhalation is usually the most significant route of entry into the body and so monitoring the air they breathe is vitally important. This monitoring is often referred to as person air sampling and the instrument used for this purpose are called as personal samplers.

Our Personal Sampler AI-110 samples the air inhaled by the worker during his/her working hour. It is designed in such a way that it will hang through the worker belt/cloth and its suction point is kept near the nose of a worker. As it is battery based so it will continuously work for 8 hours with a flow control option. The Particulate sampling head with 25 mm diameter filter holder provided with the system would be useful for monitoring particulates like silica, cement, dust, metal fumes, asbestos, etc. in work area of cement plants, foundries mines and also in indoor air quality monitoring etc.

Features:

• Portable, the battery operated instrument with an easy user interface.
• Rechargeable, Maintenance Free and long life Ni-Cd Battery.
• Uses 25 mm Glass Fiber Filter paper.
• Rotameter for Flow control.
• Hanger for Belt hanging for personal sampling.
• RSPM Cut-Off cyclone at filter head is also available.

Approx. 1 Lakh / Piece Get Latest Price

Product Brochure
In order to measure PM10 and PM2.5 levels in ambient air, two different samplers need to be operated simultaneously. The combo sampler reduces this effort and combines both the sampling into a single instrument, making it cost efficient and at the same time provides easiness in operation and transportation. Our Combined Sampler AI-103 is an advanced state of the art technology based instrument for a combined sampling of PM10, PM 2.5 and four water-soluble gases SO2, NO2, NH3, and O3.

Single stage impactor has been fitted to remove dust greater than 10 microns from ambient air when sucked through it at a constant flow rate of 1m3/hr. It comes with 47 mm filter cassette for placing a filter paper of 47 mm diameter glass fiber filter for collecting PM 10 dust.

For a sampling of 2.5 microns dust, USEPA standard design based impactors have been incorporated in the AI-103. The impactor removes the dust size greater than 2.5 microns from ambient air in the dual stage, PM10 impactor for the dust of 10 microns and WINS impactor for the dust of 2.5microns. Airflow rate of 1m3/hr is maintained during the operation. A Filter cassette of 47 mm dia is placed under this impactor that holds a PTFE filter of 46.2 mm diameter to collect PM2.5 dust particles. AI-103 comes with gaseous sampling attachment either thermoelectrically cooled or ice cooled.

Features:

• PM10 and PM2.5 Impactors of sampler based on designs standardized by USEPA.
• Two-part cabinet ensures that temperature of both filter papers filter remains close to ambient temperature.
• Brush-less pump with a double diaphragm with low noise.
• The lower sampling rate of 1m3/hr reduces filter choking even in areas having high FPM levels.
• Critical Orifice maintains constant sampling rate of 1 m3/hour for both impactors.

Technical specifications:

• Flow Rate PM10 & PM2.5: Constant sampling rate of 1 m3/hr unaffected by voltage fluctuation and filter choking maintained by critical orifice system.
• Size Selective inlets: Omni-directional air inlet with PM 10 separation through an impactor followed by PM 2.5 separation through a WINS Impactor.
• Vacuum Pump: Oil-Free, non-pulsating double diaphragm pump driven by induction motor for stable flow rate
• Automatic Sampling: Digital timer to automate the operation of the timer.
• Sample Volume: Two Dry Gas meters to records the total air volume sampled in both the impactor.
• Filter: Both Filter holder designed to accept any standard 47 mm diameter filter media.

Approx. 9 Lakh / Unit Get Latest Price

Approx. 3.5 Lakh / Unit Get Latest Price

Approx. 7.5 Lakh / Unit Get Latest Price

Approx. 60,000 / Piece Get Latest Price

Product Brochure
Particulate air pollution is separated into three classifications; coarse, fine and ultrafine particles. Coarse particles have a diameter of between 10µm and 2.5µm and settle relatively quickly whereas fine (0.1 to 2.5µm in diameter) and ultrafine (<0.1µm in diameter) particles remain in suspension for longer.

Our Respirable Dust Sampler AI-101 for PM10 sampling in ambient air uses the NEERI designed cyclone with a sharper cut-off at 10 microns to separate the bigger particulates from the air stream before filtering it on the glass microfibre filter. By using the AI-101, measurement of Respirable Particulate Matter can be done accurately and TSPM can also be measured by collection of dust collected in the dust cup at the bottom of the cyclone. The Cabinet design is upgraded for the easy lesser height of machines thus contributing lesser total weight of the machine and helps in easy transportation of it from site to site. The AI-101 can be easily paired with a gaseous sampling attachment for a sampling of gases like SO2, NO2, NH3, O3 etc.

Features:

• Programmable timer to automatically start/shut off the system after a preset time interval.
• With Low Noise and Brushless Blower.
• Improved cabinet design which is more sturdy and durable and lightweight.
• Brushless blower reduces equipment downtime and maintenance effort.
• Dedicated Stabilizer for low voltage correction within the instrument
• Lockable casters, top cover and gaseous attachment.
• Comes along with gaseous sampling attachment.
• Comes with 4 glass impingers for a sampling of various gases.
• Noiseless blower (Optional)

Technical specifications:

• Sampling Time Record: 0 to 9999.99 hrs. recorded at a Time Totalizer
• Particle size: Particles of 10 microns & below collected on Filter Paper. SPM bigger than 10 microns collected in a separate sampling cup under the cyclone.
• Filter paper: 8”x10” Glass Fibre Filter Paper.
• Automatic Sampling: 24 hrs programmable timer to automatically shut off the system after a pre-Control set time interval.

Approx. 150 / Piece Get Latest Price

Imported filter
Leak free to ensure High Quality Supply
Ultra Clear Cassette
37 mm for indoor air supply 
MCE Filter 

Available in both a standard two-piece style and a three-piece style. These cassettes meet the NIOSH requirements for sampling most dusts, fumes and mists. Three-piece cassettes allow open face sampling, typically for asbestos and other fibers.

Approx. 8,000 / Piece Get Latest Price

Air pollution comes from many different sources: stationary sources such as factories, power plants, and smelters and smaller sources such as dry cleaners and degreasing operations; mobile sources such as cars, buses, planes, trucks, and trains; and naturally occurring sources such as windblown dust, and volcanic eruptions, all contribute to air pollution. Air Quality can be affected in many ways by the pollution emitted from these sources. These pollution sources can also emit a wide variety of pollutants.

Monitoring of various gas parameters in the high-quality ambient air allows us to assess how bad air pollution is from day to day, which areas are worse than others and whether levels are rising or falling. We can see how pollutants interact with each other and how they relate to traffic levels or industrial activity.

Next Sense Technologies made PGM-01 is a portable gas monitor that detects the concentration of various toxic gases present in ambient air. The instrument comes with a wide variety of sensor combination that can be accommodated in a single device or into multiple devices. The PGM-01 can operate intermittently or continuously and has inbuilt data logging facility. The high-quality sensors used to ensure quick, accurate and reliable results.

Features:

• High sensitivity & resolution.
• Low power consumption.
• Good stability and excellent anti-interference ability.
• Fully automatic operation with the rechargeable battery.
• Auto-calibration.
• Low battery alarm.
• High & Low limit alarm.
• IP65 grade enclosure.
• Compact and light weight body.
• Easy user interface.
• Internal memory for data logging.
• Easy data retrieval through USB port.
• Carrying case for easy handling.
• Continuous diffusion/sampling process (optional)

Detection range and signal output:

Approx. 65,000 / Piece Get Latest Price

Product Brochure
Stack sampling or stack monitoring is the experimental process for evaluating the characteristics of waste gas stream emissions into the atmosphere from industrial facilities to meet environmental standards.

Our Stack Sampler AI-104 can monitor Particulate Matter (PM) and various water-soluble gaseous like SO2 from stacks or diesel generator chimneys for source emission monitoring. In order to make the instrument easier to use on tall chimneys and for easy transportation to even remote places, we have designed our instrument to be lightweight, highly portable and have an easy user interface. The AI-104 comes with push fittings instead of metal ring joints for better use and easy working. Particulate matter is collected over a filtration thimble via sampling probe. The gaseous pollutants are absorbed in suitable reagents in glass impingers. The gas flow rate can be controlled by flow meters provided within the instrument and the digital meters indicate various other stack parameters instantly.

Features:

• Digital pressure meter for measuring stack pressure and velocity.
• Robust and compact design.
• Light Weight and fully portable vacuum pump.
• Lightweight and easy to use a panel.
• Separate gas sampling tray for impingers.
• Separate carrying case for all accessories.
• Pitot tube and probe pipe come with extendable arms.
• Flexible probe pipe.

Technical specifications:

• Manometer: Digital manometer with direct reading in mmH2O.
• Pitot Tube: 1 meter long S-type fabricated in SS-304 and extendable to 3m.
• Particulate sampling: 2 – 30 lpm collection on thimble type filter.
• Sampling Probe: Made from an SS-304 tube, 1m length extendable to 3m
• Gaseous sampling: 0.2 – 3 lpm collection in a set of Borosilicate glass impingers.
• Rotameter: Plastic Body with 0-30 lpm for Particulate matter (PM) and 0-3 lpm for Gases.
• Filter holder: Made from SS-304 tube suitable to hold either cellulose filtration thimble (size 28mm ID X 100mm long) or glass micro fibre thimble (size 19mm ID X 90mm long).
• Digital Clock: 0-60 minutes, 1 second readout with start and stop switches
• Sampling Impinger: 1 No. of 240 ml impinger & 3 Nos. of 120 ml impinger Borosilicate glass impingers accommodated in the ice tray.
• Vacuum Pump: Monoblock Rotary Vane type, single phase motor (230V) with the capacity of 50 lpm free flow capacity.

Price on Request: Get Latest Price

Product Brochure

Air pollution comes from many different sources: stationary sources such as factories, power plants, and smelters and smaller sources such as dry cleaners and degreasing operations; mobile sources such as cars, buses, planes, trucks, and trains; and naturally occurring sources such as windblown dust, and volcanic eruptions, all contribute to air pollution. These pollution sources can also emit a wide variety of pollutants which can be measured by many methods. Absorption of gaseous pollutants in a liquid medium is one of the most common methods for collecting air samples.

 

Our Gaseous Sampling Attachment AI-111 comes in two models. Thermoelectrically cooled and Ice tray based gaseous sampler. The AI- 111 requires only a few LPM of air flow. The gaseous samplers are provided with a suction port and mounting hardware to facilitate interface of the instrument with other air samplers. A flow rate meter is attached with the AI-111 to set the air flow rate at the desired rate. Icebox with fiber body is given along with impinger case to provide cooling to impingers while sampling to avoid evaporation of gas in the dissolved sample.

Features:

• Lightweight, robust and durable body
• Attachable to any RDS/FPS and no power is required.
• No heating up of absorbing solutions due to heat from the blower.
• Provision of using ice or cold water bath around impingers for complete absorption of sparsely soluble gases.
• Facility of taking the impinger tray directly to the laboratory for the safer transit of glass parts.
• Four Gases can be sampled at a time.
• Independent flow controller at each gas.
• Fiber Body ice box for least heat transfer.

 

Price on Request: Get Latest Price