Ground water is among the Nation’s most precious natural resources. Measurements of water levels in wells provide the most fundamental indicator of the status of this resource and are critical to meaningful evaluations of the quantity and quality of ground water and its interaction with surface water. Next Sense Technologies made GWLR-01, Digital Ground Water Level Recorder Piezometer, is a data logger and submersible pressure transducer combination designed for remote monitoring and recording of water level or pore pressure data. The sensor is lowered into the well on a reinforced cable and submerged below the water. Once in place, the initial water pressure reading is synced with the current water level. The unit then monitors the water pressure for changes, and the pressure difference is converted to a change in water level. The entire unit is hermetically sealed to prevent any moisture from getting into the instruments circuitry. The instrument comes along with inbuilt memory and GPRS enabled web telemetry for remote communication of data. Optional rechargeable battery along with solar panel is also available for uninterrupted power even at remote places. The GWLR-01 is used for measuring water levels in bore wells, dams, open channels and lakes.
Weather variables such as wind speed and direction, air temperature, humidity and rainfall may all be important factors in determining the course of a wide range of events. For example, agriculture has always been heavily dependent on the weather and weather forecasts, both for its control on the quality and quantity of a harvest and its effect on the farmer’s ability to work the land or to graze his stock. Water resources generally depend critically not just upon rainfall, but also other weather phenomenon that together drive plant growth, photosynthesis and evaporation. Just as pollen and seed dispersal in the atmosphere are driven almost entirely by the weather, so too is the direction and distance of travel of atmospheric pollution. Weather monitoring is also important not just in defining present climate, but also for detecting changes in climate and providing the data to input into models which enable us to predict future changes in our environment. The demand for weather data, usually on an hourly or more frequent timescale, has increasingly been met by the development and widespread deployment of automatic weather stations. The NS-WMS-01, provides sophisticated monitoring and logging of essential weather conditions such as temperature, barometric pressure, wind direction, wind speed, rainfall, relative humidity and solar radiation etc. High accuracy sensors are used to serve the purpose. The microcontroller based weather station comes with inbuilt memory for logging of data for several months. Data can be retrieved easily through the USB port. It has GPRS enabled web telemetry for continuous and online transmission of weather data to any server. The instrument comes along with a rechargeable battery and solar panel for uninterrupted power supply. Application areas include agriculture, hydrology, ecology and meteorology. For customized applications, our instrument can come with the best blend of sensors, data logger and accessories accordingly.
Features include a shrouded stainless steel probe (allows accurate level determinations under cascading water conditions), a buzzer (with adjustable volume control), and sensitivity control as standard. An optional tape guide/datum acts as a reference point and also prevents tape abrasion from the casing edge. The moisture resistant electronics and standard 9V battery are housed in the front for quick and easy access.
Particulate air pollution is separated into three classifications; coarse, fine and ultrafine particles. Coarse particles have a diameter of between 10µm and 2.5µm and settle relatively quickly whereas fine (0.1 to 2.5µm in diameter) and ultrafine (<0.1µm in diameter) particles remain in suspension for longer.
Our Respirable Dust Sampler AI-101 for PM10 sampling in ambient air uses the NEERI designed cyclone with a sharper cut-off at 10 microns to separate the bigger particulates from the air stream before filtering it on the glass microfibre filter. By using the AI-101, measurement of Respirable Particulate Matter can be done accurately and TSPM can also be measured by collection of dust collected in the dust cup at the bottom of the cyclone. The Cabinet design is upgraded for the easy lesser height of machines thus contributing lesser total weight of the machine and helps in easy transportation of it from site to site. The AI-101 can be easily paired with a gaseous sampling attachment for a sampling of gases like SO2, NO2, NH3, O3 etc.
This sanitiser dispensor is fully SS make , SNC based perfect cut, spray based , with lights to show dispensing , total volume of chamber 8 liter in which 5 liter general sanitiser jar can be easily fitted inside in plug and play format.
Our Laboratory Hot Air Oven WI-04 are constructed with corrosion resistant stainless steel and fitted with branded instruments and thus offering reliable results and quality performance all the time. Our laboratory ovens are used for high forced volume thermal convection applications. These ovens generally provide uniform temperatures throughout. Process applications for laboratory ovens can be for annealing, drying, sterilizing and other industrial/laboratory functions.
Established as Partnership firm in the year 2015 at Aligarh (Uttar Pradesh, India), we “Engineering And Environmental Solution” are a renowned Manufacturer, Wholesaler, Exporter, Importer, Trader and Retailer of a qualitative assortment of Air Quality Monitor, Air Sampler, COD Digester and much more. Our offered range is widely acclaimed for its features like elevated durability, optimum performance, and easy maintenance. Under the headship of, “Hamza” (Sales and Marketing Manager), we have achieved a noteworthy position in the market.